Smart Rigging and Accesories
CatalogueApex System
DigiHoist System
Elevation System
Libra System
Velocity 2 System
Truss
-
F14
-
F22
-
F23
-
F24
-
F31 | F31PL
-
F32
-
F33 | F33 PL
-
F34 | F34 PL
-
F34P
-
F42
-
F43
-
F44 | F44P
-
F52 | F102
-
F54
-
U Frame | U Top
Coupler
Chain Hoist
Manual Control
POWERSAFE
SHOWSAFE
Rigging Solution
Hardware Solution
-
Safety Wire
-
Coupler – Tube Ø 25-38MM
-
Coupler – Tube Ø 48-51MM
-
Coupler – Tube Ø 60MM
-
Arm Coupler & Pipe-to-Pipe Coupler
-
Screen Truss Mount & Projector Mount
-
Clamp – Tube Ø 25-38MM
-
Clamp – Tube Ø 38-51MM
-
Clamp – Tube Ø 48-51MM
-
Clamp – Tube Ø 60MM
-
Sand Bag & Shot Bag
Power Solution
-
POWERFIT 400AMP Connectors
-
K-LOK Single Pole Connectors
-
K-LOK Single Pole Connectors [Mini-Cam]
-
19-PIN
-
400A Single Pole Distribution Box
-
Cable Assembly
-
Cee Form & Schuko
-
Cable Crossover & Tape
-
Cable Tie & Clip
-
Power Distribution Box
-
Rubber Cubic Power Distribution Box
-
Splitter Box & Y Splitter
-
XLR & Powerlead
StageSmarts

Lifter made with structural steel for the base and 6082-T6 aluminum alloy for the sections. Designed to lift loads from the ground, and keep them at high altitudes.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A150 features the inertial pendulum ILS safety system. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly, and most important: automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.3m (17.4′) |
Max. Load | 150Kg (331 lb) |
Safety | ILS (Inertia Lock System) |
Work Surface | 1.7 x 1.85m (5.6 x 6.1′) |
Folded Height | 1.54m (5′) |
Winch | 450Kg (990 lb) |
Adaptor Forks | 0.5m included |
Weight | 107Kg (236lb) |
The TL-A220 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A220 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.5m (18′) |
Max. Load | 220Kg (485 lb) |
Safety | ALS auto-lock |
Work Surface | 2.1 x 1.6m (6.9 x 5.2′) |
Folded Height | 1.72m (5.6′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 111Kg (244.7lb) |
The TL-A300 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A300 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.8m (19′) |
Max. Load | 300Kg (662 lb) |
Safety | ALS auto-lock |
Work Surface | 1.9 x 2.1m (6.2 x 6.9) |
Folded Height | 1.58m (5.2′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 165Kg (364lb) |
The TL-A400/8 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A400/8 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 8,2m (26.9′) |
Max. Load | 400Kg (881.9 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.1m (8.4 x 7′) |
Folded Height | 1.98m (6.5′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 230Kg (507lb) |
The TL-A500 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A500 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 7m (22.96′) |
Max. Load | 500Kg (1102.3 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.12m (8.4 x 7′) |
Folded Height | 1.87m (6.13′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 190Kg (419lb) |
VMB

Lifter made with structural steel for the base and 6082-T6 aluminum alloy for the sections. Designed to lift loads from the ground, and keep them at high altitudes.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A150 features the inertial pendulum ILS safety system. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly, and most important: automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.3m (17.4′) |
Max. Load | 150Kg (331 lb) |
Safety | ILS (Inertia Lock System) |
Work Surface | 1.7 x 1.85m (5.6 x 6.1′) |
Folded Height | 1.54m (5′) |
Winch | 450Kg (990 lb) |
Adaptor Forks | 0.5m included |
Weight | 107Kg (236lb) |
The TL-A220 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A220 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.5m (18′) |
Max. Load | 220Kg (485 lb) |
Safety | ALS auto-lock |
Work Surface | 2.1 x 1.6m (6.9 x 5.2′) |
Folded Height | 1.72m (5.6′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 111Kg (244.7lb) |
The TL-A300 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A300 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.8m (19′) |
Max. Load | 300Kg (662 lb) |
Safety | ALS auto-lock |
Work Surface | 1.9 x 2.1m (6.2 x 6.9) |
Folded Height | 1.58m (5.2′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 165Kg (364lb) |
The TL-A400/8 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A400/8 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 8,2m (26.9′) |
Max. Load | 400Kg (881.9 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.1m (8.4 x 7′) |
Folded Height | 1.98m (6.5′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 230Kg (507lb) |
The TL-A500 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A500 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 7m (22.96′) |
Max. Load | 500Kg (1102.3 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.12m (8.4 x 7′) |
Folded Height | 1.87m (6.13′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 190Kg (419lb) |
Eilon Engineering

Lifter made with structural steel for the base and 6082-T6 aluminum alloy for the sections. Designed to lift loads from the ground, and keep them at high altitudes.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A150 features the inertial pendulum ILS safety system. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly, and most important: automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.3m (17.4′) |
Max. Load | 150Kg (331 lb) |
Safety | ILS (Inertia Lock System) |
Work Surface | 1.7 x 1.85m (5.6 x 6.1′) |
Folded Height | 1.54m (5′) |
Winch | 450Kg (990 lb) |
Adaptor Forks | 0.5m included |
Weight | 107Kg (236lb) |
The TL-A220 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A220 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.5m (18′) |
Max. Load | 220Kg (485 lb) |
Safety | ALS auto-lock |
Work Surface | 2.1 x 1.6m (6.9 x 5.2′) |
Folded Height | 1.72m (5.6′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 111Kg (244.7lb) |
The TL-A300 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A300 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.8m (19′) |
Max. Load | 300Kg (662 lb) |
Safety | ALS auto-lock |
Work Surface | 1.9 x 2.1m (6.2 x 6.9) |
Folded Height | 1.58m (5.2′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 165Kg (364lb) |
The TL-A400/8 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A400/8 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 8,2m (26.9′) |
Max. Load | 400Kg (881.9 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.1m (8.4 x 7′) |
Folded Height | 1.98m (6.5′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 230Kg (507lb) |
The TL-A500 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A500 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 7m (22.96′) |
Max. Load | 500Kg (1102.3 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.12m (8.4 x 7′) |
Folded Height | 1.87m (6.13′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 190Kg (419lb) |
-
Ron™ StageMaster 6000G5
-
Ron™ StageMaster 5000G5
-
Ron™ Bluetooth Receiver
-
Eilon Classic Load Cell
-
Shackle Pin Load Cell
ShowTex

Lifter made with structural steel for the base and 6082-T6 aluminum alloy for the sections. Designed to lift loads from the ground, and keep them at high altitudes.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A150 features the inertial pendulum ILS safety system. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly, and most important: automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.3m (17.4′) |
Max. Load | 150Kg (331 lb) |
Safety | ILS (Inertia Lock System) |
Work Surface | 1.7 x 1.85m (5.6 x 6.1′) |
Folded Height | 1.54m (5′) |
Winch | 450Kg (990 lb) |
Adaptor Forks | 0.5m included |
Weight | 107Kg (236lb) |
The TL-A220 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A220 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.5m (18′) |
Max. Load | 220Kg (485 lb) |
Safety | ALS auto-lock |
Work Surface | 2.1 x 1.6m (6.9 x 5.2′) |
Folded Height | 1.72m (5.6′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 111Kg (244.7lb) |
The TL-A300 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A300 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 5.8m (19′) |
Max. Load | 300Kg (662 lb) |
Safety | ALS auto-lock |
Work Surface | 1.9 x 2.1m (6.2 x 6.9) |
Folded Height | 1.58m (5.2′) |
Winch | 900Kg (1980 lb) |
Adaptor Forks | 0.75m included |
Weight | 165Kg (364lb) |
The TL-A400/8 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A400/8 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 8,2m (26.9′) |
Max. Load | 400Kg (881.9 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.1m (8.4 x 7′) |
Folded Height | 1.98m (6.5′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 230Kg (507lb) |
The TL-A500 towerlift has been designed for lifting line array audio systems from the ground and keep them fix at high altitude. It has 2 special aluminum straps fixed from the legs to the aluminum base section to reinforced the body of the lifter.
This lifting tower is very compact and easy to handle, it has 4 swivel wheels at the base. It fits through a door.
It has powerful stabilizers in the legs, to level the lifter in difficult terrains, with slight slope.
Black finish, with epoxy powder paint to the oven, which offers great resistance (The towerlift can be painted in the desired color, under prior request).
It has two adjustable steel load forks that support the load, either supported on top of it, or hung underneath.
VMB offers you a wide range of accessories, which combined with this lifter allows you to increase its unlimited number of applications. One of the most used accessories, for example, is the FAS-01, which is used to hang Line Array audio systems in a fast and effortless way.
The TL-A500 features the ALS Red locks of VMB, which automatically blocks each section while lifting. And the inertial pendulum ILS safety system for the aluminum lifting carriage. It also has the special SRS Retentor system, patented by VMB, which guarantees that the towerlift will raise the aluminum sections orderly and automatically.
VMB offers you a 2-year warranty and stock of spare parts for 5 years. In addition we have our own factory in Spain, where we offer service to review and repair your lifter.
Max. Height | 7m (22.96′) |
Max. Load | 500Kg (1102.3 lb) |
Safety | ALS auto-lock |
Work Surface | 2.57 x 2.12m (8.4 x 7′) |
Folded Height | 1.87m (6.13′) |
Winch | 1200Kg (2640 lb) Winch Plus |
Adaptor Forks | 0.75m Array reinforced Forks included |
Weight | 190Kg (419lb) |