Array Interface
Array PD-ES is the perfect marriage of Power Distribution and Emergency Stop control. This distribution and safety module provides a SIL2/3 emergency stop system, individual MCBs for each output and an adjustable RCD with status indicator.
Description
This 6U 19″ rack module provides 125A of emergency stop switched power through four 32A three-phase Ceeform outlets.
All three-phase outlets are protected with an adjustable RCD. A single-phase auxiliary outlet is provided along with dual XLR7 data outputs for Connection to Elevation1+ controllers.
The unit includes Transform 485 functionality providing an interface between Vector or K2 and Elevation1+. The front panel features an integrated Emergency Stop button, status indicators, individual MCBs for each Ceeform outlet and an adjustable RCD. ‘Power Present’ status indicators are provided on both front and back panels.
FEATURES
• Power distribution and emergency stop system contained in a 6U 19” rack enclosure
• Single-phase auxiliary outlet
• 4 x 32A three-phase individually switched Ceeform outlets
• Adjustable RCD
• Integrated Emergency Stop button
CONTROL CONNECTIONS
Ethercon for connection to Vector/K2 • 2 x XLR7 outputs
CONTROL CONNECTIONS
Ethercon for connection to Vector/K2 • 2 x XLR7 outputsMAINS INPUT/OUTPUT
Powerlock or CamLok E1016 type single-pole connectors with through outlets • 4 x 32A
“Ceeform” type IEC60309 5-pole connectors • 1 X 16A “Ceeform” type IEC60309 3-pole
connector • 1 x Outlet suitable for local territory e.g. Schuko/Edison
This unit provides 32A of emergency stop switched power through two 32A three-phase Ceeform outlets.
A single-phase auxiliary outlet is provided for technical use. The three-phase outlets are protected with an adjustable RCD. Along with power and
status indicators, the unit includes Transform 485 functionality providing an interface between Vector or K2 and Elevation1+.
Multiple fixing points for hook clamps or half couplers allow for a variety of mounting orientations.
FEATURES
• Power distribution and emergency stop system contained in a compact case
• Two 32A three-phase Ceeform outlets protected with an adjustable RCD
• Single phase auxiliary outlet
• Adjustable RCD
• Multiple fixing points for hook clamps or half couplers
MAINS INPUT/OUTPUT
• 5-pin 32A Red ‘Ceeform’ type plug to IEC60309 • 2 x 5pin 32A ‘Ceeform’ type socket to IEC60309
• 1 x 16A ‘Ceeform’ type IEC60309 3 pole connector
CONTROL CONNECTIONS
Ethercon for connection to Vector/K2 • 2 x XLR7 outputs
Array 485 is a 1 in 8 out RS485 distribution unit for use with Elevation1+.
The rear panel features 1 in 8 out XLR7 data connections for outputting RS485 data to Elevation1+ units. The front panel offers link, data and emergency stop status indicators as well as the facility to plug a Rigger remote in for local control.
FEATURES
• 1 in 8 out XLR7 RS485 distribution unit
• Rigger input on front panel for local hoist control
• Emergency stop LED indicators on front panel
• 1U 19″ rack mountable case
CONTROL CONNECTIONS
8 x XLR7 female outputs • 1 x XLR7 male input
Array IP8 is a rugged 8 port 10/100 Ethernet switch that is designed to work with Kinesys products.
Ethercon connectors on the rear of the unit provide increased protection for 8 x RJ45 connections. Standard RJ-45 connectors can also be plugged
into these outputs. LEDs on the front panel of the unit indicate if power is present, provide a channel by channel breakdown of activity and whether
each channel is operating at 10 or 100 BASE-T.
FEATURES
• 8 port 10/100 BASE-T Ethernet switch
• Ethercon connectors
• LED activity lights on the front panel
• 1U 19″ rack mount unit
CONTROL CONNECTIONS
8 x 10/100 BASE-T Ethernet Ethercon
Designed to integrate seamlessly into a motion control system these units allow devices on different networks to communicate.
Transform 485 translates between the native Ethernet protocol, outputted by Vector and K2 controllers and the RS485 bus used by the Elevation range via an XLR7. The Transform 485 unit also features an emergency stop button built in, allowing an extra level of emergency stop protection. LED indicators on the front of the Transform 485 give clear indications as to the status of communications and the unit itself.
Features
- Converts Ethernet from K2 or Vector to RS485 used by the Elevation range
- Built in emergency stop button
- LED indicators on the front panel
2 x XLR7 outputs