Intercom Series
The X6R/V3R-INTERCOM platform allows customizable intercom, control and network connectivity, utilizing state of the art analog and digital circuitry for ultimate reliability.
Description
Network and Digital Connectivity Options:
FX – The OPTOCORE fiber network module
allows the intercom unit to be used as a part of a 24 device OPTOCORE redundant ring
topology network.
4 Serial ports – Sync – 2 LAN ports – 2 SANE/LAN ports
TP – The SANE Cat5 module
allows the intercom unit to be used as a Cat5 expansion device for OPTOCORE FX devices
or as a standalone analog – AES/EBU converter.
16 AES3 I/O – Word Clock I/O – 1 LAN port – 2 SANE/LAN ports

8 I/O Channel Clear-Com / RTS / AES/EBU Interface for OPTOCORE and SANE
16 channels of Intercom and data, which can be routed through OPTOCORE and SANE network.
KEYFACTS:
- 8 x 4-wire or AES3 intercom ports
- Integration with Clear-Com, RTS or AES/EBU intercom
- Matrix or Panel pinout
- 32-bit transparent transport and routing
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422
- 2 x LAN
- Word Clock I/O
- Dual redundant PSU
TECHNICAL SPECIFICATIONS:
INTERCOM ports | Hardware standard: IC422/IC485: FCC-RJ45 | 8 x inputs, 8 x outputs |
Analog Line Input | Impedance | 10 kΩ |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 100 dB | |
Analog Line Output | Impedance | 45 Ω |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 98 dB | |
Serial I/O | ||
– IC422 | EIA / TIA – 422 | |
– IC485 | EIA / TIA – 485 | |
SANE, LAN ports | Convention | |
Audio | TIA – 568A/B, Optocore | 200 Mbit/s |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s |
Auxiliary Ports | Convention EIA / TIA-485 | |
Data channels | Digital control data | 4 |
Data rate | Up to 10 Mbps | |
Impedance | Termination | 330 Ω |
Source | ≤ 10 Ω | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | Depending on used sample rate | 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz |
Impedance | Output | 75 Ω |
Input | 1k / 75 Ω software switch | |
Optical Link | Input, Output, Dual – Full bandwidth | |
Connection | Duplex LC | |
Protocol | Optocore | |
Transmission | Full duplex | |
Data rate | 2 x 2 Gbps | |
Optical wave guide cable lengths | Multimode fibre 50 µm | ≤ 700 m |
Monomode fibre 9 µm | ≤ 70 km (on request) | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | 44.1 kHz – 192 kHz | |
Power supply | 2 (optional) independent power supplies with function check and automatic switch-over | |
Type | Switch-mode, universal input | |
Mains voltage | 100…240VAC, 50/60Hz, 25VA-typ, 32VA-peak | |
Remote Control | ||
RS232 / USB / Ethernet | Control Interface to PC | |
Dimensions | 1 RU / 19” | |
W x H x D | 483 x 44 x 200mm | 19.0 x 1.73 x 7.87 inch |
Weight | 2.7 kg | 6.0 lbs |
4 I/O Channel Clear-Com / RTS Interface for OPTOCORE and SANE
8 channels of Intercom and data, which can be routed through OPTOCORE and SANE network.
KEYFACTS:
- 4 x 4-wire intercom ports
- Integration with Clear-Com, RTS intercom
- Matrix or Panel pinout
- 32-bit transparent transport and routing
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422
- 2 x LAN
- Word Clock I/O
- Dual redundant PSU
TECHNICAL SPECIFICATIONS:
INTERCOM ports | Hardware standard: IC422/IC485: FCC-RJ45 | 4 x inputs, 4 x outputs |
Analog Line Input | Impedance | 10 kΩ |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 100 dB | |
Analog Line Output | Impedance | 45 Ω |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 98 dB | |
Serial I/O | ||
– IC422 | EIA / TIA – 422 | |
– IC485 | EIA / TIA – 485 | |
SANE, LAN ports | Convention | |
Audio | TIA – 568A/B, Optocore | 200 Mbit/s |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s |
Auxiliary Ports | Convention EIA / TIA-485 | |
Data channels | Digital control data | 4 |
Data rate | Up to 10 Mbps | |
Impedance | Termination | 330 Ω |
Source | ≤ 10 Ω | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | Depending on used sample rate | 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz |
Impedance | Output | 75 Ω |
Input | 1k / 75 Ω software switch | |
Optical Link | Input, Output, Dual – Full bandwidth | |
Connection | Duplex LC | |
Protocol | Optocore | |
Transmission | Full duplex | |
Data rate | 2 x 2 Gbps | |
Optical wave guide cable lengths | Multimode fibre 50 µm | ≤ 700 m |
Monomode fibre 9 µm | ≤ 70 km (on request) | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | 44.1 kHz – 192 kHz | |
Power supply | 2 (optional) independent power supplies with function check and automatic switch-over | |
Type | Switch-mode, universal input | |
Mains voltage | 100…240VAC, 50/60Hz, 25VA-typ, 32VA-peak | |
Remote Control | ||
RS232 / USB / Ethernet | Control Interface to PC | |
Dimensions | 1 RU / 19” | |
W x H x D | 483 x 44 x 200mm | 19.0 x 1.73 x 7.87 inch |
Weight | 2.7 kg | 6.0 lbs |
8 I/O Channel and 8 GPIO for OPTOCORE and SANE
16 channels of audio and data, which can be routed through OPTOCORE and SANE network.
KEYFACTS:
- 8 x analog input and outputs
- 8 x GPI and 8 x GPO transport
- D-SUB 37 pin connectors
- 32-bit transparent transport and routing
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422
- 2 x LAN
- Word Clock I/O
- Dual redundant PSU
TECHNICAL SPECIFICATIONS:
INTERCOM ports | Hardware standard: IC444 | 8 x inputs, 8 x outputs |
Analog Line Input | Impedance | 10 kΩ |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 100 dB | |
Analog Line Output | Impedance | 45 Ω |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 98 dB | |
General Purpose Inputs – GPI | Optically isolated | 3…48V DC, 5…7mA |
General Purpose Outputs – GPO | Relay contacts | DC 30V 2A (resistive load) |
AC 125V 0.6A (resistive load) | ||
Auxilary Power | +5V DC | ≥ 100mA combined per IC444 module |
+12V AC | ||
SANE, LAN ports | Convention | |
Audio | TIA – 568A/B, Optocore | 200 Mbit/s |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s |
Auxiliary Ports | Convention EIA / TIA-485 | |
Data channels | Digital control data | 4 |
Data rate | Up to 10 Mbps | |
Impedance | Termination | 330 Ω |
Source | ≤ 10 Ω | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | Depending on used sample rate | 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz |
Impedance | Output | 75 Ω |
Input | 1k / 75 Ω software switch | |
Optical Link | Input, Output, Dual – Full bandwidth | |
Connection | Duplex LC | |
Protocol | Optocore | |
Transmission | Full duplex | |
Data rate | 2 x 2 Gbps | |
Optical wave guide cable lengths | Multimode fibre 50 µm | ≤ 700 m |
Monomode fibre 9 µm | ≤ 70 km (on request) | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | 44.1 kHz – 192 kHz | |
Power supply | 2 (optional) independent power supplies with function check and automatic switch-over | |
Type | Switch-mode, universal input | |
Mains voltage | 100…240VAC, 50/60Hz, 25VA-typ, 32VA-peak | |
Remote Control | ||
RS232 / USB / Ethernet | Control Interface to PC | |
Dimensions | 1 RU / 19” | |
W x H x D | 483 x 44 x 200mm | 19.0 x 1.73 x 7.87 inch |
Weight | 2.7 kg | 6.0 lbs |
4 I/O Channel and 4 GPIO for OPTOCORE and SANE
8 channels of audio and data, which can be routed through OPTOCORE and SANE network.
KEYFACTS:
- 4 x analog input and outputs
- 4 x GPI and 4 x GPO transport
- D-SUB 37 pin connectors
- 32-bit transparent transport and routing
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422
- 2 x LAN
- Word Clock I/O
- Dual redundant PSU
TECHNICAL SPECIFICATIONS:
INTERCOM ports | Hardware standard: IC444 | 4 x inputs, 4 x outputs |
Analog Line Input | Impedance | 10 kΩ |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 100 dB | |
Analog Line Output | Impedance | 45 Ω |
Maximum input level | +18 dBu | |
SNR | 115 dB (A-weighted) | |
THD+N @ -1dBFS | ≥ 98 dB | |
General Purpose Inputs – GPI | Optically isolated | 3…48V DC, 5…7mA |
General Purpose Outputs – GPO | Relay contacts | DC 30V 2A (resistive load) |
AC 125V 0.6A (resistive load) | ||
Auxilary Power | +5V DC | ≥ 100mA combined per IC444 module |
+12V AC | ||
SANE, LAN ports | Convention | |
Audio | TIA – 568A/B, Optocore | 200 Mbit/s |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s |
Auxiliary Ports | Convention EIA / TIA-485 | |
Data channels | Digital control data | 4 |
Data rate | Up to 10 Mbps | |
Impedance | Termination | 330 Ω |
Source | ≤ 10 Ω | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | Depending on used sample rate | 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz |
Impedance | Output | 75 Ω |
Input | 1k / 75 Ω software switch | |
Optical Link | Input, Output, Dual – Full bandwidth | |
Connection | Duplex LC | |
Protocol | Optocore | |
Transmission | Full duplex | |
Data rate | 2 x 2 Gbps | |
Optical wave guide cable lengths | Multimode fibre 50 µm | ≤ 700 m |
Monomode fibre 9 µm | ≤ 70 km (on request) | |
Word clock | Hardware standard 75 Ω / BNC | |
Data rate | 44.1 kHz – 192 kHz | |
Power supply | 2 (optional) independent power supplies with function check and automatic switch-over | |
Type | Switch-mode, universal input | |
Mains voltage | 100…240VAC, 50/60Hz, 25VA-typ, 32VA-peak | |
Remote Control | ||
RS232 / USB / Ethernet | Control Interface to PC | |
Dimensions | 1 RU / 19” | |
W x H x D | 483 x 44 x 200mm | 19.0 x 1.73 x 7.87 inch |
Weight | 2.7 kg | 6.0 lbs |