Light Control
SkyPanel Standard Diffusion panels have been developed to work perfectly with the SkyPanel-C models.
Description
4-leaf Barndoor
The 4-leaf barndoor for the SkyPanel allows for control of light spill and narrowing of the beam angle. Additional small flaps protect against light leak between the lamphead and the barndoors.
- Lightweight and Rugged Design
- Two safety hooks to hold the barndoor in place
- 4-leaf design with light leak flaps (only applicable to S30 & S60)
- Slides into outer accessory slot allowing for changing of diffusion panels without the removal of the barndoors
The 4-leaf barndoor for the SkyPanel allows for control of light spill and narrowing of the beam angle. Additional small flaps protect against light leak between the lamphead and the barndoors.
- Lightweight and Rugged Design
- Two safety hooks to hold the barndoor in place
- 4-leaf design with light leak flaps (only applicable to S30 & S60)
- Slides into outer accessory slot allowing for changing of diffusion panels without the removal of the barndoors
FlexDoor
The FlexDoor is a lightweight, fabric barndoor that provides control over light spill and direction. It has a top and bottom leaf that can be positioned and tilted independently.
- Lightweight, fabric barndoor
- 2-leaf design
- snap-on attachment
- Tilt control of the top and bottom flags
The FlexDoor is a lightweight, fabric barndoor that provides control over light spill and direction. It has a top and bottom leaf that can be positioned and tilted independently.
- Lightweight, fabric barndoor
- 2-leaf design
- snap-on attachment
- Tilt control of the top and bottom flags
4/8/16-Chamber Eggcrate
This eggcrate is 130 mm thick (5.1 inches) and controls light by limiting the half peak angle to 60°.
- 4(S30)/8(S60)/16(S120) chambers design allows for minimal light loss
- 130 mm (5.1 inches) thick
- 60° HPA
- Rugged design
- Extra accessory slot for stacking other SkyPanel accessories
- Slides into the primary accessory slot
This eggcrate is 130 mm thick (5.1 inches) and controls light by limiting the half peak angle to 60°.
- 4(S30)/8(S60)/16(S120) chambers design allows for minimal light loss
- 130 mm (5.1 inches) thick
- 60° HPA
- Rugged design
- Extra accessory slot for stacking other SkyPanel accessories
- Slides into the primary accessory slot
Honeycomb 60°
The 60° Honeycomb for the SkyPanel controls the light by reducing the beam angle to approximately 60 degrees.
- Honeycomb design reduces multiple shadows
- 14 mm (0.6 inches) thick
- ~60° HPA
- Slides into the primary accessory slot
The 60° Honeycomb for the SkyPanel controls the light by reducing the beam angle to approximately 60 degrees.
- Honeycomb design reduces multiple shadows
- 14 mm (0.6 inches) thick
- ~60° HPA
- Slides into the primary accessory slot
Honeycomb 30°
The 30° Honeycomb for the SkyPanel controls the light by reducing the beam angle to approximately 30 degrees.
- Honeycomb design reduces multiple shadows
- 14 mm (0.6 inches) thick
- ~30° HPA
- Slides into the primary accessory slot
The 30° Honeycomb for the SkyPanel controls the light by reducing the beam angle to approximately 30 degrees.
- Honeycomb design reduces multiple shadows
- 14 mm (0.6 inches) thick
- ~30° HPA
- Slides into the primary accessory slot
Snoot
This SkyPanel snoot is 130 mm thick (5.1 inches) and controls light, not allowing spill light from the sides of the lamphead.
- Straight wall snoot with one large chamber
- 130 mm (5.1 inches) thick
- Rugged design
- Extra accessory slot for stacking other SkyPanel accessories
- Slides into the primary accessory slot
This SkyPanel snoot is 130 mm thick (5.1 inches) and controls light, not allowing spill light from the sides of the lamphead.
- Straight wall snoot with one large chamber
- 130 mm (5.1 inches) thick
- Rugged design
- Extra accessory slot for stacking other SkyPanel accessories
- Slides into the primary accessory slot
Extra Diffusion Slot
The SkyPanel Extra Diffusion Slot slides into the primary accessory slot of the SkyPanel and allows for stacking for multiple diffusors.
- Fits all SkyPanel S30/S60/S120 Diffusors
- Top safety latch
- Thin profile
- Slides into the primary accessory slot or the front of the SkyPanel Snoot or Eggcrate
- Extra accessory slot for stacking other SkyPanel accessories
The SkyPanel Extra Diffusion Slot slides into the primary accessory slot of the SkyPanel and allows for stacking for multiple diffusors.
- Fits all SkyPanel S30/S60/S120 Diffusors
- Top safety latch
- Thin profile
- Slides into the primary accessory slot or the front of the SkyPanel Snoot or Eggcrate
- Extra accessory slot for stacking other SkyPanel accessories
SkyBender
The SkyBender for SkyPanel -C versions produces a uniform intensity light field over the length of any surface, transforming the beam by simply sliding into the front of the fixture. This is the perfect accessory for lighting a green screen, creating color wall washes, lighting a translight or backdrop, or evenly lighting a cyclorama.
- Additional Versatility
- +/- 1/6 F-Stop Uniformity
- Smooth & Even Distribution
- Lightweight design
- Slides into the primary accessory slot
The SkyBender for SkyPanel -C versions produces a uniform intensity light field over the length of any surface, transforming the beam by simply sliding into the front of the fixture. This is the perfect accessory for lighting a green screen, creating color wall washes, lighting a translight or backdrop, or evenly lighting a cyclorama.
- Additional Versatility
- +/- 1/6 F-Stop Uniformity
- Smooth & Even Distribution
- Lightweight design
- Slides into the primary accessory slot
Previous
Next