FP5 NYX Bulb comes with USB cable for DC operation.
FP5-PS NYX Bulb Power Station comes with E27 socket.
FP5-SET NYX Bulb Set comes with 8 NYX Bulbs, 1 PowerStation, 8 CupBouncers, 8 USB cables, 1 x 48VDC PSU
FP5-PS-SET NYX Bulb Power Station Set comes with 8 PowerStations, 8 TrackPins, 8 PowerStation Hangers, 1 x 24VDC PSU, 8-way adapter cable.
LIGHT BULB FOR FILMMAKERS AND EVENT PROFESSIONALS
The first color-tunable LED bulb for professional film, stage and event productions. Not bigger than a normal LED bulb, it contains a CRMX receiver as well as RF and Bluetooth modules for the AsteraApp. It can be powered via lamp socket or with a standard power bank and thanks to its Titan LED engine it displays precise colors and white tones with ultra-high CRI and TLCI.
Colors: Red, Green, Blue, Mint, Amber
Luminous Flux: 750lm*
Total LED power: 14W
Max power draw: 10W
TLCI (3200-6500K)*: ≥96
CRI (3200-6500K)*: ≥96
Beam Angle: 120˚
Field Angle: 180˚
(* Typical value)
Each bulb allows AC and DC power
AC Power: FP5-E26: 100-120 VAC, FP5-E27: 100-240VAC
DC Power: 5-18VDC, 2.1A via DC socket
Setup Via AsteraApp or Battery Base
Wireless Modules: UHF, CRMX, Bluetooth
DMX: Wireless DMX (CRMX)
UHF: 100m | 110 Yards
CRMX: 100m | 110 Yards
Bluetooth: 3m | 3 Yards
Housing: Aluminium + polycarbonate
Ingress Protection: IP44
Relative humidity: 0-100%
Operating Temperature: 0-40 ˚C | 32-104 ˚F
Weight: 0.24kg | 0.53Lbs
Dimensions: Ø70 x 130mm | Ø2.76” x H5.12”
with range from 1,750K
Display exact CCT, RGB & HSI values or reproduce standard color gels.
Ultra High Color Rendering
TLCI ≥96, CRI ≥96, CRI Re≥90 from 3200K to 6500K
Power through AC + DC
Power through lamp socket or via external battery (5~18VDC)
Built-in LumenRadio CRMX receiver
Direct App Control
No AsteraBox required (coming soon)
PowerStation (Battery Pack & external display)
Connect the integrated cable to your bulb’s DC connector to power it up. While connected, the Power Station acts as a remote display to program DMX addresses and settings which the bulb will store in its memory. It can also set colors, effects, brightness etc which the bulb will continue to display when in a powered lamp socket or connected to a power bank. Apart from its backside magnets the Power Station features an airline track to attach mounting accessories such as Babypin and Single Stud Ring.
Multiple Mounting Options
A smart control system of your Film Lighting Bulb. Infrared remote, wireless DMX and app work together to enable big setups. Your entire installation can be set up, monitored and adjusted in a fast and convenient way.
Create complex programs out of colors, effects and settings. The lights will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which lights should receive commands.
Keep a complete overview over the status and all settings of your lights while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual lights and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if lights are controlled via DMX.
Set Up Faster
Set DMX addresses and profiles for one light or several lights.
50 units can be prepared in less than 5 minutes.
After your job, do a quick master reset of all settings and the lights are ready for the next event.
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with LumenRadio CRMX technology, the most stable wireless DMX protocol available.
All Astera Battery Powered PAR carry the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Features unique to Astera Bulb
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles
Set the length of your production and be sure that your lights won’t run out while still getting the maximum brightness
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Scrambled PWM technology to avoid flickering when filming.
Adjust green/magenta during content creation to reduce postproduction work.
Switch lights into power-saving standby and schedule them to wake up when the production starts.
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Switches to white light when AC power is cut to keep your event safe.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
The AsteraApp™ is packed with many additional items and new features are frequently added via software update.