Description
Titan LED Engine, 25W, Wireless & Wired DMX
Beam shaping with six included light modifiers and a large range of mounting options make HydraPanel more flexible than any other product in its class. The full-spectrum Titan LED Engine generates an impressive 1300 Lumen output while running on battery power for 1:45h. All packed into a solid watertight housing of just 600g weight and 166mm length (1.3lb, 6.5″).
Technical Specifications
Optical
Order Code: FP6
LED Engine: Titan LED Engine
Colors: RGB Mint Amber
Total LED Power: 25W
Power Draw: 17W
Luminous Flux 3200K: 1102 Lumens
Luminous Flux 4000K: 1287 Lumens
Luminous Flux 5500K: 1298 Lumens
Light output 3200K @ 1m: 443 Lux
Light output 4000K @ 1m: 512Lux
Light output 5500K @ 1m: 516 Lux
CRI(Ra)/TLCI 3200-6500K*: ≥96
Beam Angle: 110° x 100°
Strobe: 0 – 25Hz
Pixels: 6
*Typical value
Electrical
Battery Runtime: up to 20 hours
Battery Runtime Max Brightness: 1h 45m
Battery Lifetime: 70 % after 300 cycles
Charging Time (nominal): 3 hrs
DC Input: 24VDC – 0.85A
DC Connector: 5.5mm x 2.1mm
Control
Wired DMX: Yes Via FP1-PWB/FP3-DTL/PWB2-86
CRMX Receiver: Built-in
BluetoothBridge BTB: Built-in
Wireless Protocols: CRMX, UHF, Bluetooth, WiFi
Wireless Range (CRMX/UHF): Up to 300 m / 330 yds
Bluetooth: Up to 3 m / 3.3 yds”
Infrared Control: Yes
ControlSync: Yes
TouchSlider: Yes
Construction
Housing Material: Polymer & Metal
IP Rating: IP65
Ambient Operating Temperature: 0° – 40 °C / 32 – 104 °F
Weight: 604g / 1.3 lb
Dimensions L x W x D: 166mm x 85mm x 43.5mm / 6.53″ x
3.34″ x 1.71″
Titan LED Engine
Industry-leading colors and whites
Wireless and Wired DMX
Built-in CRMX module and wired DMX via Astera PowerBox
Light Modifiers
6 included modifiers to adjust beam from 40° to 100°
New Control Panel
Touch Slider for faster setting of colors, CCT, brightness etc
Easy Integration into Scenery
Unobtrusive Look when installed via backside magnet
FlexBase
Stand on floor, mount via Babypin, screw to walls etc.
Cold Shoe
Add third-party accessories and mount on cameras
Combine up to 4 panels
Synchronized control from a single control panel
Astera System
A smart (bi-directional) control system where Infrared remote, wireless DMX and app work together to enable big setups that can be set up, monitored and adjusted in a fast and convenient way.
Control Lights
Create complex programs out of colors, effects and settings. The lights will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which lights should receive commands.
Monitor lights
Keep a complete overview over the status and all settings of your lights while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual lights and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if lights are controlled via DMX.
Set Up Faster
Set DMX addresses and profiles for one light or several lights.
50 units can be prepared in less than 5 minutes.
After your job, do a quick master reset of all settings and the lights are ready for the next event.
LumenRadio
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with LumenRadio CRMX technology, the most stable wireless DMX protocol available.
Compatibility
All Astera Battery Powered PAR carry the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Unique Astera Features
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles
Seamless Runtime
Set the length of your production and be sure that your lights won’t run out while still getting the maximum brightness
TruColor Calibration
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Flicker Free
Scrambled PWM technology to avoid flickering when filming.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Scheduled Standby
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Emergency Lights
Switches to white light when AC power is cut to keep your event safe.
Anti-Theft
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraApp is packed with many additional items and new features are frequently added via software update.