Mux22 series
Mux22 is an application engineered device which offers every signal that is needed in the professional environment in just a small 1RU chassis. Mux22 combines 3G/HD/SD-SDI I/O with Optocore and SANE digital audio networks, creating a compact solution to transport video, along with audio and data, on the duplex fiber.
Description
Mux22 is a device, which combines different formats of video, data in a single duplex fiber cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fiber cable.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 8 x FRAMESYNC8 Outputs, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- 8 x FRAMESYNC8 Outputs with common phase shift
- Each sync output can be selected as BB/Tri-L or WC
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- V-Sync independently configured from FrameSync8 module
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard 8x BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
FrameSync8 | Hardware standard BNC – 75 Ω | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN TWO REDUNDANT DUPLEX FIBER CABLES
16 x 3G-SDI video, 4x Port, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 2 x 1310nm auxiliary tunnel
KEY FACTS:
- Full Automatic Redundancy Switchover
- up to 16 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- Integration with intercom (any of MUX22 type is available in redundant version)
- 2 x COM port for redundant Video
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- 2 x Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
INTERCOM ports | 4-wire intercom standard | ||
Connection | RJ45 | ||
Clear-Com, RTS, AES/EBU RJ45, AES/EBU BNC | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard 8x BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 4 x 4-wire INTERCOM for Clear-Com, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- Integration with Clear-Com 4-wire intercom
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
INTERCOM ports | 4-wire Clear-Com intercom standard | ||
Connection | RJ45 | ||
4 x line input, 4 x line output, 4 x RS422 | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard 8x BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 4 x 4-wire INTERCOM for RTS, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- Integration with RTS 4-wire intercom
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
INTERCOM ports | 4-wire Clear-Com intercom standard | ||
Connection | RJ45 | ||
4 x line input, 4 x line output, 4 x RS485 | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard 8x BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 4 x Line In, 4 x Line Out, 4 x GPIO, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- 4 Line In, 4 Line Out, 4 GPIO
- Auxiliary 5V and 12V voltage
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
AUDIO/GPIO ports | |||
Connection | DB37 | ||
4 x line input, 4 x line output, 4 x GPI, 4 x GPO, Aux power 5V and 12V | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 4 x duplex AES intercom ports, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- Integration with AES-based intercom, i.e. Riedel or Clear-Com
- Transparent transport and routing of AES user bits (for AES intercom control)
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
INTERCOM ports | AES/EBU | ||
Connection | RJ45 | ||
8 x AES IN (4 pairs), 8 x AES OUT (4 pairs) | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 8 x duplex AES3id BNC intercom ports, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- Integration with BNC-AES3id-based intercom, i.e. Riedel or Clear-Com
- Transparent transport and routing of AES user bits (for AES intercom control)
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
INTERCOM ports | AES/EBU | ||
Connection | BNC | ||
16 x AES IN (8 pairs), 16 x AES OUT (8 pairs) | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
8 x 3G-SDI video, 4 x dual MADI ports (fiber or BNC), 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 8 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- 4 x SC fiber MADI ports or 4 x BNC MADI I/O
- Integration with any AES10 enabled device
- Built-in MADI single-channel router
- Transparent transport and routing of AES user bits
- Emulation Mode for Studer, Soundcraft, Yamaha, Lawo and SSL – control of Optocore microphone preamps directly from the console
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
MADI ports | AES10 | ||
Connection | SC fiber or coax BNC | ||
4 x MADI I/O | |||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
16 x 3G-SDI video, 2 x Optocore fiber links, 2 x SANE/LAN, 2 x LAN, 4 x RS485/422 or 4 x GPIO (to be specified while ordering), V-Sync I/O, 1310nm auxiliary tunnel
KEY FACTS:
- 16 x 3G-SDI reclocked video channels
- Video available in different I/O combinations
- 2 x fiber SFP ports for redundant Optocore ring
- 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
- 4 x RS485/422 or 4 x GPIO
- 2 x LAN
- V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
- Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
- Dual redundant PSU
- No fan
- 1RU chassis
TECHNICAL SPECIFICATIONS:
Video ports | |||
Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | ||
Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | ||
Interface | SDI – Serial Digital Interface | ||
Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | ||
Connection | LC | ||
Data rate | Dependent on the Video data rate – no bandwidth restriction | ||
Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | |
Special singlemode transceiver | ≤ 80 km (on request) | ||
SANE, LAN ports | Convention | ||
Audio | TIA – 568A/B, Optocore | 200 Mbit/s | |
LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | |
Serial Data Port | Convention EIA / TIA-485 | ||
Data channels | Digital control data | 4 | |
Data rate | Up to 10 Mbps | ||
Impedance | Termination | 330 Ω | |
Source | ≤ 10 Ω | ||
Auxiliary Fiber Port | 1310nm fiber tunnel | ||
Connection | Duplex LC | ||
Data rate | Dependent on the distance between locations – no bandwidth restriction | ||
Sync | Hardware standard BNC – 75 Ω | ||
Input Standards | Word Clock, Black Burst (bi-level), Tri-Level PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Standards | Word Clock, Black Burst (bi-level), Tri-Level BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25 | ||
Output Phase Shift | Line, Frame, Pixel, Percent, Degree | ||
Remote Control | |||
RS232 | EIA / TIA – 232 | 57 600 Baud | |
USB | USB 2.0 – Device | 12 Mbit/s | |
LAN | IEEE – 802.3 | 10/100 Mbit/s | |
Power Supply | |||
Type | Switch-mode, universal input | ||
Mains voltage | 100… 240 V | 50 60 Hz | |
Frequency | 50 60 Hz | ||
Cooling | Passive, via surface and ventilation openings on both sides of the device | ||
Dimensions | 1 RU / 19” | ||
W x H x D | 19.0 x 1.73 x 7.87 inch | ||
Weight | Dependent on configuration |