Networking & Distribution
Configure and maintain your lighting systems with powerful DMX, RDM and Ethernet based networking solutions.
Net-X II is a versatile rack-mountable Ethernet-to-DMX node, which also functions as a merger for two controllers on either Ethernet or DMX inputs. It has the ability to record up to 10 DMX presets, which can be triggered remotely. Net-X II has two 5-pin DMX inputs and eight 5-pin DMX outputs – all optically isolated, and can output up to eight universes simultaneously. The eight 5-pin DMX outputs can be individually assigned to either of the two DMX inputs (or the Ethernet inputs to mix network inputs with DMX inputs in a single device). LTP and HTP merging fully supports network protocols
sACN, Art-Net or DMX to merge two incoming controllers to any DMX output. It has RDM over network functionality. Net-X II provides a reliable platform for novice users with its preset configuration library, while providing experts with a highly customizable network infrastructure for complex control systems.
5-pin DMX splitter/distributor
Art-Net/sACN to DMX converter, up to 8 universes
DMX to Art-Net/sACN converter, up to 8 universes
Merge two 5-pin DMX universes into a single universe, or merge 2 NET controllers (Art-Net or sACN) into the same universe, then convert to standard 5-pin DMX for the outputs
HTP (highest takes priority) and LTP (latest takes priority) merge functions supported
Backup settings and configurations with same or other NET-X IIs
Webserver supported for remote configuration and backup/update
Integrated Record function allows you to record looks from a controller and save them into memory (10 shows in memory, 100 steps each) to trigger up to 4 shows/zones simultaneously using the 5-wire Phoenix cold contacts on the rear of the unit
Supports RDM over Art-Net for remote fixture management
RDMX Splitter 8 is a versatile RDM and 5-pin DMX opto-splitter with a rugged, durable housing. It features 8 outputs and 2 inputs, so it can instantly go from a 1×8 splitter to a 2×4 splitter for two different universes. To simplify installation next to existing fixtures, PowerCON power linking is also supported to make it easier than ever to isolate, amplify and split a signal. For added versatility, the unit can be either rack or trust-mounted and supports electrical isolation between inputs and outputs up to 1000 V between ports.
Universal RDM E1.20 compliant 5-pin DMX opto-splitter that supports either 1×8 (single universe) or 2×4 (dual universes) modes with the press of a button; or functions as a 2×4 A/B splitter
Includes power linking to make it easy to install next to existing fixtures, so isolating, amplifying, and splitting signal are now easier than ever
Rugged reinforced housing supports 1U rackmount and mounting to pipe and truss without additional accessories
Electrical isolation between inputs and outputs up to 1,000 V between ports
PowerCON power linking supported to make it easy to split signal at a fixture, where power and data are already present
Synapse 4 functions as an intelligent relay pack to control the power sent to individual lighting units. Synapse 4 can de-power entire sections of an installation, which prolongs the lifespan of lighting fixtures and decreases overall power consumption, saving energy and money. Rack, truss or wall mountable, Synapse 4 also offers flexible options to control its four outputs: 1) via DMX; 2) upon sensing the loss of the DMX signal; 3) via an internal scheduler that can be used to specify that individual outputs be turned on/off. As an added convenience, a 4-port DMX opto-isolator allows users to easily branch their DMX universe in multiple directions and amplify the signal after a long cable run.
Controllable powerCON relay pack and DMX optically isolated splitter/amplifier
Compounds the savings of LED fixtures by completely removing power when not in use
Individually control all 4 relays via DMX, DMX sensing or internal scheduler for specific on/off times every day
Optically isolated 5-pin DMX splitter provides an easy hub for running DMX to multiple locations
Convenient mounting options; rack mount, wall mount or clamped to truss
ÉPIX Drive 2000 IP is IP65 outdoor-rated and hosts the processing and power supply for the ÉPIX IP and Tour system. With a maximum capacity of 2000 LEDs, ÉPIX Drive 2000 IP supports Art-Net, Kling-Net, and sACN, giving you a variety of control options. Thanks to an integrated web server, you can remotely diagnose, troubleshoot, and change settings as needed without having to directly access the ÉPIX fixtures. Using the new 7 and 8 channel operating modes you can quickly and easily configure and program shows in minutes with minimal time/effort to create stunning looks.
The processing and power center of the ÉPIX Tour system will drive any combination of ÉPIX Tour products, up to 2000 LEDs.
Versatile control options include Art-Net, Kling-Net, and sACN (streaming ACN) to support the touring/rental/installation markets.
Quickly and easily configure the ÉPIX Drive 2000 IP using the built-in OLED display and touchscreen menu.
Easily detect and automatically configure your devices using the auto-address function, regardless of fixture order or type (Bar/Strip/Strip IP).
Easily daisy chain fixtures directly from the 2 outputs of the Drive 2000 IP.
Advanced power management design allows you to position the Drive 2000 IP up to 150 ft away from your last fixture (using unshielded cable).
Works with Arkaos Media Master Express and the Kling-net control protocol for a plug-n-play system that requires almost no training to operate.
RDM2go is a multi-functional tool for working with fixtures over a DMX/RDM data line. This palm-sized controller performs a multitude of tasks including RDM functionality, DMX snapshot and test-scene record and playback, DMX input and output monitoring. RDM2go features a built-in DMX cable integrity checker, and an easy to read OLED display. It also addresses Chauvet’s Iluminarc IP fixtures that do not have a display. The unit easily recharges via a standard micro USB jack and comes with a convenient carry pouch and DMX connector converters.
Handheld tool for managing fixtures and systems with DMX, RDM, and Ilumicode based control
Easily address, locate and monitor RDM capable fixtures
Check DMX addressing, cabling, and store/playback basic snapshots
Address and set personalities of Ilumicode based architectural fixtures
Comes with connector adaptors, USB charging cord and belt clip pouch
PowerStream 4 is an ingenious splitter for powerCON® connections. Placed into the main power feed, it taps into up to five connections out to fixtures, allowing users to pre-rig a truss and limit the need for additional cables.
Provides power in five different directions
Small form factor allows easy rigging
Wireless Solutions Mirco T-1 Transceiver works with W-DMX wireless wash lights, including all WELL and Maverick fixtures, to generate a wireless control signal for both DMX and RDM protocols. These compact devices can also be set up to transmit or receive W-DMX signals to make any fixture or rig wireless. It also features a 5 V USB power supply or can be used with (4) AAA batteries for up to 4 hours in transceiver mode and 8 hours in
receiver mode. Indicator LEDs easily show signal strength, battery life, and transceiver or receiver mode.
Transmit and receive 1 universe of W-DMX and RDM protocols
Power with included 5V USB power supply or (4) AAA batteries (not included)
Batteries last for up to 8 hours in receiver mode and 4 hours in transceiver mode
Built in indicator lights for signal and battery strength, as well as operation modes
Can be used directly with any Maverick or WELL fixtures
Can be used to make any lighting system wireless for data